Slat Book and the Bead Loom

Last night I was looking through some work in progress and saw a bead loom. It was a gift that I never used, but thought it might come in handy for something, some day.

Bead Loom

A bead loom is basically springs attached to a wood frame. In my limited use of springs, it makes sense that a larger spring would work when weaving thicker fiber.

Something that did occur to me when removing the piece from the loom, it would be a good idea to place a rod next to the spring and wrap the fiber around the rod before placing in the spring.

Bead Loom With Rod

After quickly trying my idea, I found that there was a need for clamps to the hold the rod in place.

Back to the weaving experiment: I strung the bead loom with some nettle and started weaving. I used cream wool, nettle, and Tecoma pods.

Bead Loom Result

The result is exciting because it might be the solution to my slat book problem. I plan to use Pandorea jasminoides parts, stitched with a letter in code.

Plant Bits

Slat books typically use regular shaped pieces for each of the slats. The Pandorea jasminoides parts are a variety of widths and lengths. I really like them because they bring to mind shields.

If I were to use a similar weaving process, I think it just might work. I plan to try using three strand of nettle on each side leaving the central section of the Pandorea jasminoides parts open for easy reading of the code. Well, maybe not actually easy reading. It will be code.

Slat Book with information about the plant materials and code posted on September 17th, 2015

Slat Book with information about glycerin and code posted on October 11th, 2015


Serendipitous events can result in great ideas.
Or, discovery makes making art so much fun.


Leave a Reply